[Nlkko]

What would be the cause of this? The tachometers backlit and all other lights works. Speedometer needle still moves.
The 6 middle LED (speedometer) is out.

 

[2way]

OEM LEDs or aftermarket?

Generally speaking, it would be a problem on that circuit board as the other backlights are working.

 

[Nlkko]

Aftermarket. Will try soldering replacement LED s to see if that addresses it.

 

[2way]

Make sure that they are all oriented correctly.

 

[Nlkko]

So re-soldered the LEDs. 2 of old LEDs were dead but the rest still work. The culprit is likely vibration from street's pot holes. Been going over some shitty roads recently. That and probably my previous less-than-stellar soldering job.