Installation costs?

thats rape!

yeh 5 bills seems like way too much. i was charged $150 for shock/spring installation for my 91 mr2 which took about 3 hours. i dont know if it takes longer or the process is harder on a celica but still, $500 seems like way too much! peace out, Brian

what are you paying /hour. A 6 hour job at $60 dollars per hour is still only 360 dollars.

its a 2 and a 1/2 hr job if you do it yourself.. and it wont cost anything

it will take longer than 2.5 hours if its your first time. But if you want to learn something its good experience and you can use the money you would have given somebody else and buy your own tools.

ya just do it your self its not hard just go to autozone get a spring compereser ( i didnt use one) and look up the intsall and go at it. its not hard it took me like 3 hours my first go at it

ok, thanks for the advice. However, i dont have a lift or know anyone who has a lift, so i gotta take it to a shop. I'll look around. THanks

ted18852103 said:

ya just do it your self its not hard just go to autozone get a spring compereser ( i didnt use one) and look up the intsall and go at it. its not hard it took me like 3 hours my first go at it

Click to expand...

how could you not use a spring compressor?:AF:

I didn't use a spring compresser, but its a good thing to have. You don't need a lift, use your jack, one at a time. First time took me 3hrs total.

anyone know how much it would be to get a direct bolt on lambo door kit installed? should i maybe open my own thread?

Open a new thread in the "appearance mods" section. ( i have no idea what it would cost)

around here they are quoting me $400. its insane. i cant find a shop for cheaper

how are you guys able to do it without compressing the springs??

I got mine installed for 130 or 150 in Chicago...

Do it yourself with your jack if you have no jackstands - just do one wheel at a time. It only a matter of taking a few bolts out and taking the old shock/spring out and putting the new ones in. Remember that you should get an alignment after replacing suspension pieces. You should be able to find a tutorial on this site about installing tein coilovers. Same deal. You just need to know how to use the spring compressor (very easy, they should be able to tell you at the store you borrow it from).

humm..... i would like to install them myself if its not too hard. I'll take a look in to it. Thanks for all the advice guys.