Forum banner

Turbo Oil

1201 Views 27 Replies 10 Participants Last post by  enjoi4586
So I finished my install on my turbo today, and as I primed it, it was all good. As I let it sit for a couple minutes I didn't have a filter or the piping on and it is spitting out oil.

Is this normal? :scared:
1 - 1 of 28 Posts
Well it depends. If it is coming out of the turbo, the turbo is faulty. When you attached the oil lines, did you put in teflon tape around the connector parts to make sure they are snug? cause if they are loose it will leak oil.

Other than that All i can say is make sure your have the correct feeding oil line in the right hole in the turbo.
1 - 1 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.