NewCelica.org Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,025 Posts
Axle Carrier? I have a full set of rear suspension from a gt-s.
 

·
Registered
Joined
·
1,025 Posts
Sounds like what we call the lower contorl arms? Left and right? Not the spindles (or knuckles as we call them) Do you need the crossmember as well?
 

·
Registered
Joined
·
1,069 Posts
Discussion Starter #5
LilRocketSpyder said:
Sounds liek what we call the lower contorl arms? Left and right? Not the spindles (or knuckles as we call them) Do you need the crossmember as well?
sounds about right
i got that name form the toyota celica manual

i dont need the spindles/knuckles
i dont think i need the cross member but i will verify

i did a rear disc brake conversion
the GT lower control arms are 1/4" thicker than the GT-S to compensate for a narrower spindle & drum
this has pushed my wheels out 1/4"
since i have 235 tires, the tires rub the fenders with stock camber
i have given myself some serious negative camber to compensate for this, but i rather just get the GT-S parts to do the job correctly
 

·
Registered
Joined
·
1,025 Posts
According to my crash book:

The knuckles are showing to be different gt - gts.

The control arm bushings are showing to be different gt - gts.

The crossmember is the same as are the control arms.
 
1 - 6 of 6 Posts
Top